The Tenth International IFIP WG 5.2/5.3 Conference
PROLAMAT 98
September 9-10-11 & 12, 1998 Trento - Italy

All papers by country of the first author

The following list shows all papers presented at the Conference. Papers are sorted according to the country of the affiliation of the first author. Papers with authors from different countries appear in this list according to the country of the affiliation of the first author. Co-authors of each paper follow in alphabetical order (NOT in the order in which they appear on the papers). The country of affiliation of co-authors is next to their names.

ARMENIA AUSTRALIA BELGIUM BRAZIL BULGARIA
CANADA FINLAND FRANCE GERMANY GREECE
HUNGARY INDIA IRELAND ISRAEL ITALY
JAPAN KOREA MEXICO MOROCCO NETHERLANDS
NORWAY POLAND PORTUGAL ROMANIA RUSSIA
SPAIN SWITZERLAND UNITED KINGDOM USA  

 

ARMENIA
# 58 Manufacturing Systems Models With Discre te Events and Their Analysis on the Basis of Enlarging Method
  Kerobyan Khanik V., Armenian Computer Society, Yerevan, Armenia
  Avetisyan Karen, Armenian Computer Society, Yerevan, Armenia
  Kazaryan Artasches E., Armenian Computer Society, Yerevan, Armenia
  Kazaryan Edvard A., State Engineering University of Armenia, Yerevan, Armenia

 

AUSTRALIA
# 75 A Framework for Round the Clock Design and Support
  Mo John P.T., CSIRO Manufacturing Science and Technology, Melbourne, Australia
  Cirocoo Luigi, CSIRO Manufacturing Science and Technology, Melbourne, Australia
  Kovacek Michael, CSIRO Manufacturing Science and Technology, Melbourne, Australia

 

BELGIUM
# 98 Equipment Selection and Line Balancing with Resource Dependent Task Times
  Delchambre Alain, University of Brussels, Department of Applied Mechanics, Bruxelles, Belgium
  Falkenauer Emanuel, University of Brussels, Department of Applied Mechanics, Bruxelles, Belgium
# 116 Agility and Human Factors in the Virtual Enterprise
  Frederix Florent L.M., Alcatel-Microelectronics, Oudenaarde, Belgium

 

BRAZIL
# 1 An Efficient Approach to Concurrent Engineering and Design in International Collaborations and Partnerships
  Baake Uwe F., Debis-Humaita, HPTD, Sao Paulo, Brazil
  Haussmann Dieter E., Debis-Humaita, HIPD, Sao Paulo, Brazil
# 35 Delegating Management Tasks through Negotiation and Contracting in the Open Service Market
  Dotti Fernando Luìs, Pontificia Universidade Catolica do Rio Grande do Sul (PUCRS), Instituto de Informatica, Porto Alegre, RS, Brazil
# 129 An Oriented Decision Support System Model for Virtual Enterprise Coordination
  Spinosa Luiz Marcio, Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
  Ferreira Aureo C., Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
  Klen Alexandra A. Pereira, Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
  Rabelo Ricardo J., Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
# 114 High-Level Coordination of Business Processes in a Virtual Enterprise
  Spinosa Luiz Marcio, Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
  Klen Alexandra A.P., Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
  Rabelo Ricardo J, Federal University of Santa Catarina, Mechanical Engineering Dept., Grucon / G-SIGMA-Intelligent Manufacturing Systems Group, Florianopolis (SC), Brazil
# 3 The Role of Industrial Virtual Enterprises in Emergent Markets - The Case of Mercosul
  Steil Andrea Valeria, Federal University of Santa Catarina, Graduate Program in Production Engineering, PPGEP, Florianopolis (SC), Brazil
  Barcia Ricardo Miranda, Federal University of Santa Catarina, Graduate Program in Production Engineering, PPGEP, Florianopolis (SC), Brazil
  Pacheco Roberto C.S., Federal University of Santa Catarina, Graduate Program in Production Engineering, PPGEP, Florianopolis (SC), Brazil

 

BULGARIA
# 81 Automation, Production Systems and Computer Integrated Manufacturing in Education
  Neshkov Todor, Technical University of Sofia, ADP Department, Sofia, Bulgaria
  Velkov Christo, Technical University of Sofia, ADP Department, Sofia, Bulgaria
# 74 Modular Building of Formative Systems for Machine Tools Structures
  Todorov George, Technical University of Sofia, Department TMMM, Sofia, Bulgaria
  Peychev Christo, Technical University of Sofia, Department TMMM, Sofia, Bulgaria
  Todorov Nikola, Technical University of Sofia, Department TMMM, Sofia, Bulgaria

 

CANADA
# 103 A Distributed Object Architecture CMM Interface Pendant
  Fisher A.D., McMaster University, Department of Mechanical Engineering, Hamilton Ontario, Canada
  Fleisig R.V., McMaster University, Department of Mechanical Engineering, Hamilton Ontario, Canada
  Spence Allan D., McMaster University, Department of Mechanical Engineering, Hamilton Ontario, Canada
# 17 Development of a Virtual Collaboration Environment for Concurrent Product Development Using the Internet
  Iakovidis Greg, University of Western Ontario, Department of Mechanical and Materials Engineering, London Ontario, Canada
  Buchal Ralph O., University of Western Ontario, Department of Mechanical and Materials Engineering, London Ontario, Canada
# 122 Teaching Environmentally Conscious Design
  Jeswiet Jack, Queen's University, Mechanical Engineering, Kingston Ontario, Canada
# 38 Modelling Internet Users: a Case Study of an Expertsystem
  Moghrabi C., Université de Moncton, Computer Science and Industrial Engineering, Moncton N.B., Canada
  Eid M.S., Université de Moncton, Computer Science and Industrial Engineering, Moncton N.B., Canada
# 94 An Agent-Based Approach for Manufacturing Enterprise Integration and Supply Chain Management
  Shen Weiming, University of Calgary, Faculty of Engineering, Division of Manufacturing Engineering, Calgary A.B., Canada
  Norrie Douglas H., University of Calgary, Faculty of Engineering, Division of Manufacturing Engineering, Calgary A.B., Canada

 

FINLAND
# 115 Engineering Process Ontologies for Communication, Co-operation, and Co-ordination in a Virtual Enterprise
  Mäntylä Martti, Helsinki University of Technology, Espoo, Finland
  Ranta Mervi, Helsinki University of Technology, Espoo, Finland

 

FRANCE
# 60 Modelling and Analysis of Enterprise Processes Using Added-Value Concept
  Chapurlat Vincent, Laboratoire de Genie Informatique et d'Ingegnerie de Production LG!2P EMA/EERIE, Nimes, France
  Chalvet D., Merlin Gerin Alès-Group Schneider, Alès, France
  Coves C., Laboratoire d'Informatique, Robotique et Microélectronique-LIRMM, Montpellier, France
  Crestani D., Laboratoire d'Informatique, Robotique et Microélectronique-LIRMM, Montpellier, France
  Larnac M., Laboratoire de Genie Informatique et d'Ingegnerie de Production LG!2P EMA/EERIE, Nimes, France
  Magnier J., Laboratoire de Genie Informatique et d'Ingegnerie de Production LG!2P EMA/EERIE, Nimes, France
  Prunet F., Laboratoire d'Informatique, Robotique et Microélectronique-LIRMM, Montpellier, France
# 93 A Coordination Framework for Intelligent Agents in the Distributed Enterprise
  Espinasse Bernard, Université d'Aix-Marseille, DIAM-IUSPIM, Marseille, France
  Cloutier Louis, Université d'Aix-Marseille, DIAM-IUSPIM / SORCIIER, Université Laval, FSA / APG Solutions and Technologies, Marseille/Quebec P.Q., France/Canada
  Lefrancois Pierre, SORCIIER, Université Laval, FSA, Quebec P.Q., Canada

 

GERMANY
# 28 Application of Product Data Management Technology for Enterprise-Wide Distributed Product Development
  Abramovici Michael, Ruhr-Universitaet Bochum, Information Technology in Mechanical Engineering (ITM), Bochum, Germany
  Gerhard Detlef, Ruhr-Universitaet Bochum, Information Technology in Mechanical Engineering (ITM), Bochum, Germany
  Langenberg Lars, Ruhr-Universitaet Bochum, Ruhr-Universitaet Bochum, Information Technology in Mechanical Engineering (ITM), Bochum, Germany
# 78 Methods to Support Co-operative Product Development
  Anderl R., Darmstadt University of Technology, Department for Computer Integrated Design (DiK), Darmstadt, Germany
  Bumiller J., Daimler-Benz AG, Research and Technology, Ulm, Germany
  Krastel M., Darmstadt University of Technology, Department of Computer Integrated Design (DiK), Darmstadt, Germany
  Schiemenz Kai, Darmstadt University of Technology, Department for Computer Integrated Design (DiK), Darmstadt, Germany
  Stupperich Michael, Daimler-Benz AG, Research and Technology, Ulm, Germany
# 25 Capture and Exchange of Component Information Using EXPRESS Oriented Standards
  Balzer Michael, University of Hagen, Hagen, Germany
  Broeking Jens, University of Hagen, Hagen, Germany
  Wilkes Wolfgang, University of Hagen, Hagen, Germany
# 85 Database Support for Concurrent Digital Mock-up
  Berchtold S., University of Munich, Institute for Computer Science, Muenchen, Germany
  Kriegel Hans-Peter, University of Munich, Institute for Computer Science, Muenchen, Germany
  Poetke Marco, University of Munich, Institute for Computer Science, Muenchen, Germany
# 121 Classification of Product Knowledge - An Approach to Optimal Feedback Strategies for Design
  Dietz Peter, Institut fur Maschinenewesen, Technical University Clausthal, Clausthal-Zellerfeld, Germany
  Ort Andreas, Institut fur Maschinenewesen, Technical University Clausthal, Clausthal-Zellerfeld, Germany
  Penschke S., Institut fur Maschinenewesen, Technical University Clausthal, Clausthal-Zellerfeld, Germany
# 97 An Integrated Software Architecture for Rapid Product Development Processes
  Eck Oliver, University of Stuttgart, Institute for Computer Science (IFI), Stuttgart, Germany
  Nogge Wolfram, University of Stuttgart, Institute for Human Factors and Technology Management (IAT), Stuttgart, Germany
  Rantzau D., University of Stuttgart, High Performance Computing Centre (RUS/HLRS), Stuttgart, Germany
  Wolber Mechthild, University of Stuttgart, Institute for Human Factors and Technology Management (IAT), Stuttgart, Germany
# 80 Integrating Heterogeneous Legacy Soft- and Hardware by Means of Java Based Information Systems
  Eiffert Frank, Ruhr-Universitaet Bochum, Institute of Computational Engineering, Bochum, Germany
  Hartmann D., Ruhr-Universitaet Bochum, Institute of Computational Engineering, Bochum, Germany
# 88 VRML Authoring in the Context of Industrial Applications
  Elcacho Colette, Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
  Doerner R., Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
  Luckas V., Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
  Schaefer A., Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
# 112 Information Systems Architecture for Collaborative Manufacturing in Virtual Enterprises
  Feldmann K., University of Erlangen, Institute for Manufacturing Automation and Production Systems, Erlangen, Germany
  Rottbauer Harald, University of Erlangen, Institute for Manufacturing Automation and Production Systems, Erlangen, Germany
  Stoeckel Thomas, University of Erlangen, Institute for Manufacturing Automation and Production Systems, Erlangen, Germany
# 100 Transition to Next Generation Logistic Information Systems
  Frauenhoffer Frank, Fraunhofer Institute Manufacturing Engineering and Automation (PhG-IPA), Stuttgart, Germany
  Dorner J., Fraunhofer Institute Manufacturing Engineering and Automation (PhG-IPA), Stuttgart, Germany
  Kaufmann Thomas, Fraunhofer Institute Manufacturing Engineering and Automation (PhG-IPA), Stuttgart, Germany
  Sturm Roland, Fraunhofer Institute Manufacturing Engineering and Automation (PhG-IPA), Stuttgart, Germany
# 27 Closing the Gap between Engineering and Business Software
  Frey Georg, University of Kaiserslautern, Institute of Process Automation, Kaiserslautern, Germany
  Egger Thorsten, Zeneka GmbH, Schwetzingen/Plankstadt, Germany
# 73 Cyberbikes - Interactive Visualization of Manufacturing Processes in a Virtual Environment
  Gausemeier Jurgen, Universitaet-GH Paderborn, Heinz Nixdorf Institut, Paderborn, Germany
  Ebbesmeyer Peter, Universitaet-GH Paderborn, Heinz Nixdorf Institut, Paderborn, Germany
  Grafe Michael, Universitaet-GH Paderborn, Heinz Nixdorf Institut, Paderborn, Germany
  von Bohuszewicz Oskar, Universitaet-GH Paderborn, Heinz Nixdorf Institut, Paderborn, Germany
# 86 Co-Creation: CoCreate's Advanced Collaborative Product Development Enviroment
  Gutowski Jim, CoCreate Software GmbH, Sindelfingen, Germany
# 16 Telecooperation Systems in Engineering Companies Supplying the Metallurgy Industry: The Experience of the OrgTech Project
  Iacucci Giulio, Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
  Peters Ralph, Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
  Stiemerling Oliver, University of Bonn, ProSEC/Department of Computer Science III, Bonn, Germany
  Wulf Volker, University of Bonn, ProSEC/Department of Computer Science III, Bonn, Germany
# 84 Virtual Engineering in Investment Goods Industry - Potentials and Application Concepts
  Jasnoch Uwe, Fraunhofer-IGD, Darmstadt, Germany
  Dohms Ralf, RWTH Aachen, Laboratory for Machine Tools and Production Engineering (WZL), Chair of Production Engineering, Aachen, Germany
  Schenke Franz-Bernd, RWTH Aachen, Laboratory for Machine Tools and Production Engineering (WZL), Chair of Production Engineering, Aachen, Germany
# 50 A Knowledge Level Theory of Design and Engineering
  Klein Ruediger, Daimler-Benz Research Dept., Knowledge Based Engineering Group (FT3/EW), Berlin, Germany
# 105 Autonomous Production Cell-Information Integration for Disturbance Free Manufacturing
  Klocke F., Aachen University of Technology, Laboratory for Machine Tools and Production Engineering (WZL), Aachen, Germany
Rehse Michael, Aachen University of Technology, Laboratory for Machine Tools and Production Engineering (WZL), Aachen, Germany
Reuber M., Aachen University of Technology, Laboratory for Machine Tools and Production Engineering (WZL), Aachen, Germany
# 34 Simulation-Based Analysis and Internet-based Realisation of Collaborative Product Development Processes
  Krause Frank-Lothar, Fraunhofer-Institute for Production Systems and Design Technology, IPK Berlin, Berlin, Germany
Doblies Matthias, Fraunhofer-Institute for Production Systems and Design Technology, IPK Berlin, Berlin, Germany
Raupach C., Fraunhofer-Institute for Production Systems and Design Technology, IPK Berlin, Berlin, Germany
# 71 A Model and Simulation Based Toolbox for Flexible Production Management System
  Massberg Wolfgang, Ruhr-Universitaet Bochum, Lehrstuhl fuer Produktionssysteme und Prozessleittechnik Bochum, Germany
Thiem Ingo, Ruhr-Universitaet Bochum, Lehrstuhl fuer Produktionssysteme und Prozessleittechnik Bochum, Germany
# 55 Extended Technological Data Management with Neural Networks
  Nestler Andreas, Dresden University of Technology, Institute of Production Engineering, Dresden, Germany
Fichtner Dieter, Dresden University of Technology, Institute of Production Engineering, Dresden, Germany
Schulz Georg, Dresden University of Technology, Institute of Production Engineering, Dresden, Germany
# 44 Robust Development Processes by Holistic Quality Control
  Pfeifer Tilo, Fraunhofer Institute of Production Technology IPT, Aachen, Germany
Homering Joerg, Fraunhofer Institute of Production Technology IPT, Aachen, Germany
Siegler Stefan, Fraunhofer Institute of Production Technology IPT, Aachen, Germany
# 22 Distributed 3D Virtual Environment for Collaborative Engineering
  Schiffner Norbert, Fraunhofer Institute for Computer Graphics, Darmstadt, Germany
# 6 IT as Key Driver for Corporate Success
  Schulz Herbert, Darmstadt University of Technology, Institute of Production Engineering and Machine Tools (PTW), Darmstadt, Germany
Augustin Ralf, Darmstadt University of Technology, Institute of Production Engineering and Machine Tools (PTW), Darmstadt, Germany
# 125 Information Management for Life Cycle Assessment Using Smart Agents
  Seliger Gunther, Technical University of Berlin, Institute for Machine Tools and Factory Managment, Dept.of Assembly Tecnology and Factory Management, Berlin, Germany
Keil Thomas, Technical University of Berlin, Institute for Machine Tools and Factory Managment, Dept.of Assembly Tecnology and Factory Management, Berlin, Germany
Kruetzfeldt Dirk, Technical University of Berlin, Institute for Machine Tools and Factory Managment, Dept.of Assembly Tecnology and Factory Management, Berlin, Germany
Mueller Katrin, Technical University of Berlin, Institute for Machine Tools and Factory Managment, Dept.of Assembly Tecnology and Factory Management, Berlin, Germany
Perlewitz Holger, Technical University of Berlin, Institute for Machine Tools and Factory Managment, Dept.of Assembly Tecnology and Factory Management, Berlin, Germany
# 36 The Process Calendar: a Controlling Approach for Strategic Production Development
  Spath Dieter, Technical University of Karlsrhue, Institute for Machine Tools and Production Science, Karlsruhe, Germany
Barrho Thomas, Technical University of Karlsruhe, Institute for Machine Tools and Production Science, Karlsruhe, Germany
Riedmiller Simone, Technical University of Karlsrhue, Institute for Machine Tools and Production Science, Karlsruhe, Germany
# 104 Production-Oriented Product Modelling. The Integration of Work Planning into the Distributed Process of Product Development
  Spath Dieter, Technical University of Karlsrhue, Institute for Machine Tools and Production Science, Karlsruhe, Germany
Agostini Achim, Technical University of Karlsruhe, Institute for Machine Tools and Production Science, Karlsruhe, Germany
# 29 An Integrated Product and Process Model
  Toenshoff E.h.H.K., University of Hannover, Institute for Production Engineering and Machine Tools (IFW), Hannover, Germany
Zwick Michael, University of Hannover, Institute for Production Engineering and Machine Tools (IFW), Hannover, Germany
# 119 An Approach to an Individual Product Development Using Advanced Measurement and Human Modeling Technologies
  Trieb Rainer, TECMATH Gmbh and Co KG, Kaiserslautern, Germany
Ovtcharova Jivka, TECMATH Gmbh and Co KG, Kaiserslautern, Germany
Seidl Andreas, TECMATH Gmbh and Co KG, Kaiserslautern, Germany
# 117 Manufacturing in Networks - Competitive Advantages for Virtual Enterprises
  Westkaemper Engelbert, Fraunhofer Institute for Manufacturing Engineering and Automation (IPA), Stuttgart, Germany
Tutsch Hans Joerg, Fraunhofer Institute for Manufacturing Engineering and Automation (IPA), Stuttgart, Germany
# 120 Teleservice - Opening Doors to the World Market
  Stender Siegfried, Fraunhofer Institute for Manufacturing Engineering and Automation (IPA), Stuttgart, Germany

 

GREECE
# 10 Information Sharing in the Textile-Apparel Industry. A Step towards Quality Assurance
  Bilalis Nicholas, Technical University of Crete, Department of Production and Management Engineering, CAD Laboratory, Crete, Greece
  Kartsounis G., Agricultural University of Athens, Physics Department, Athens, Greece
  Salà Elena, TEXILIA Spa, Biella, Italy
  Soppera Franco, INCAS Spa, Biella, Italy
  Xanthas Alexandros, Technical University of Crete, Department of Production and Management Engineering, CAD Laboratory, Crete, Greece
# 33 SPA - Structural Process Analysis: an Integrated Tool for the Management of Reengineered Organizations
  Maheras Matthew V., National Technical University of Athens, Sector of Industrial Managment and Operational Research, Athens, Greece
  Xerokostas Demetri A., National Technical University of Athens, Sector of Industrial Managment and Operational Research, Athens, Greece

 

HUNGARY
# 113 Improving VE Efficiency through Product- and Enterprise Models Integration
  Mezgar Istvàn, Hungarian Academy of Sciences, Computer and Automation Research Institute, CIM Research Laboratory, Budapest, Hungary
# 91 Reverse Engineering of Free-Form Features
  Renner Gabor, Hungarian Academy of Sciences, Computer and Automation Research Institute, Budapest, Hungary
  Varady Tamas, Hungarian Academy of Sciences, Computer and Automation Research Institute, Budapest, Hungary
  Weiss Volker, Hungarian Academy of Sciences, Computer and Automation Research Institute, Budapest, Hungary

 

INDIA
# 89 Discrete Voxel Manufacturing without Slicing
  Jegathese C. Reginald, CAD Group, National Informatics Center, New Delhi, India
  Painkras Eustace, National University of Singapore, Center for Wireless Communication, Singapore, Singapore
  Prakash Edmond C., Nanyang Technological University, School of Applied Science, Singapore, Singapore

 

IRELAND
# 39 Simulating and Modelling Supply Chain Activities in the Food Industry
  Hunt Ingrid, National University of Ireland, Computer Integrated Manufacturing Research Unit (CIMRU), Galway, Ireland
  O'Connor Claire, National University of Ireland, Computer Integrated Manufacturing Research Unit (CIMRU), Galway, Ireland
  Wu Jin, National University of Ireland, Computer Integrated Manufacturing Research Unit (CIMRU), Galway, Ireland
  Zhang J., National University of Ireland, Computer Integrated Manufacturing Research Unit (CIMRU), Galway, Ireland

 

ISRAEL
# 90 Layered Manufacture of Multi-Level of Detail Models
  Fischer Anath, Technion, Department of Mechanical Engineering: Lab. for Computer Graphics and CAD, Haifa, Israel
  Azernikov S., Technion, Department of Mechanical Engineering: Lab. for Computer Graphics and CAD, Haifa, Israel

 

ITALY
# 87 Integrated Manufacturing of High-Standing Dresses for Customised Satisfaction
  Acaccia G. M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Conte M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Maina D., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Michelini di San Martino Rinaldo C., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Molfino R. M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
# 5 CAE Application Software Moves to the WEB
  Allaria R., Fiat G.S.A Gestione Software Applicativi, Torino, Italy
  Aldinucci Walter, X-Technologies, Genova, Italy
  Alemanni G., Studio Alemanni, Genova, Italy
# 70 Finite Capacity Scheduler: Knowledge Based Modelling Vs Algorythmic Solution
  Assogna Pierluigi, Theorematica SpA, Roma, Italy
  Missikoff Michele, IASI (Istituto Analisi Sistemi ed Informatica)-CNR, Roma, Italy
# 31 Production Control in a Geographically Distributed Enterprise
  Bellotti Nicola, Università degli Studi di Trento, Dipartimento di Informatica e Studi Aziendali, Trento, Italy
  Ronchetti Marco, Università degli Studi di Trento, Dipartimento di Informatica e Studi Aziendali, Trento, Italy
# 76 Methodologies and Tools for Co-operative Interaction in the Design Process
  Bottoni P., Università di Roma "La Sapienza", Dipartimento di Scienze dell'Informazione, Roma, Italy
  Costabile M. F., Università di Bari, Dipartimento di Informatica, Bari, Italy
  Mandorli Ferruccio, Università di Ancona, Dipartimento di Ingegneria Meccanica, Ancona, Italy
  Mussio P., Università di Brescia, Dipartimento di Elettronica per l'Automazione, Brescia, Italy
  Paternò F., CNUCE -CNR, Pisa, Italy
  Pizzicannella R., IASI - CNR, Roma, Italy
  Santucci G., Università di Roma "La Sapienza", Dipartimento di Informatica e Sistemistica, Roma, Italy
# 7 Inter-Company Supply Chains Integration via Mobile Agents
  Brugali Davide, Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Galarraga Stefano, Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Menga Giuseppe, Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
# 48 The Management of Measurement Monitoring Set-Ups for Proactive Maintenance
  Crenna F., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Michelini di San Martino Rinaldo C., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Rossi G. B., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
# 59 Feature-Based Product Modelling in Concurrent Engineering
  De Martino Teresa, Istituto per la Matematica Applicata, CNR, Genova, Italy
  Giannini Franca, Istituto per la Matematica Applicata, CNR, Genova, Italy
# 56 A Java-Based Model for the Development and Formal Verification of Factory Communication Systems
  Demartini Claudio, Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Iosif R., Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Sisto Riccardo, Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
# 47 Product Data Exchange Using STEP
  Demartini Claudio, CENS e Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Rivoira Silvano, CENS e Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
  Valenzano Adriano, CENS e Politecnico di Torino, Dipartimento di Automatica e Informatica, Torino, Italy
# 8 The Adoption of Intranet within SMEs: a case study
  Donghi Arturo, CEO Nero su Nero SpA, Alzate Brianza (CO), Italy
  Ravarini Aurelio, Libero Istituto Universitario Carlo Cattaneo, Centro Competenze Informatiche, Castellanza (VA), Italy
  Tagliavini Marco, Libero Istituto Universitario Carlo Cattaneo, Centro Competenze Informatiche, Castellanza (VA), Italy
# 72 VITES: Virtual Training Environment for Spraying Technologies
  Marchese Maurizio, Università degli Studi di Trento, Dipartimento di Informatica e Studi Aziendali, Laboratorio di Ingegneria Informatica, Rovereto (TN), Italy
  Bertamini Luca, Centro Sviluppo Materiali, Roma, Italy
  Jacucci Gianni, Università degli Studi di Trento, Dipartimento di Informatica e Studi Aziendali, Laboratorio di Ingegneria Informatica, Rovereto (TN), Italy
# 4 Global Order Processing in the Enterprise: the Internet Way
  Merlino Massimo, Università di Genova-DIST, Genova, Italy
  Lanata Marco, Virtual Srl, Chiavari (Genova), Italy
  Testa Stefania, Università di Genova-DIST, Genova, Italy
# 32 Artefact Integration by Concurrent Enterprises and Productive Break-Up
  Michelini di San Martino Rinaldo C., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Acaccia G. M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Callegari M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Molfino R. M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Razzoli R. P., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
# 106 Re-Engineering: Leanness Issues in Automatic Assembly
  Molfino R.M., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Lacchini A., University of Genova, DIMEC:Industrial Robot Design Research Group, Genova, Italy
  Maggiolo G., University of Genova, DIMEC:Industrial Robot Design Research Group, Genova, Italy
  Michelini di San Martino Rinaldo C., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
  Razzoli R.P., University of Genova, DIMEC: Industrial Robot Design Research Group, Genova, Italy
# 99 Using Push Technology for Industrial Automation: New Ways of Conceiving Internet/Intranet for Industries
  Molinari Andrea, Università di Trento, Dipartimento di Informatica e Studi Aziendali, Trento, Italy
  Colazzo Luigi, Università di Trento, Dipartimento di Informatica e Studi Aziendali, Trento, Italy

 

JAPAN
# 92 An Evolutionary Scheduling Paradigm Using Coordinated Autonomous Agents
  Kaihara Toshiya, University of Marketing and Distribution Sciences, Faculty of Information Science, Nishi, Kobe, Japan
  Fujii Susumu, Kobe University, Faculty of Engineering, Nada, Kobe, Japan
  Kunimasa Satoshi, Kobe University, Faculty of Engineering, Nada, Kobe, Japan
# 63 The Meaning of Manufacturing Know-How
  Kryssanov Victor V., Kobe University, Faculty of Engineering, Dept. of Computer and Systems Engineering, Kobe, Japan
  Abramov Vladimir A., IACP of FEB RAS: Institute for Automation & Control Processes, Far Eastern Division of the Russian Academy of Sciences, Vladivostok, Russia
  Fukuda Yoshiro, Hosei University, Department of Industrial and System Engineering, Tokyo, Japan
  Konishi Kazumasa, TRI of JSPMI: Technical Research Institute, Production System Section of the Japan Society for the Promotion of Machine Industry, Tokyo, Japan
# 26 Data Sharing of Shape Model withVRML Environment
  Kobayashi Kazuya G., Toyama Prefectural University, Department of Mechanical Systems Engineering / Japan Society for Precision Engineering, Kosugi, Toyama, Japan
  Fujii Miyuki, Toyama Prefectural University, Department of Mechanical Systems Engineering / Japan Society for Precision Engineering, Kosugi, Toyama, Japan
  Hayamizu Masato, Gaio Technology Co. Ltd / Japan Society for Precision Engineering, Tsuruya, Yokohama, Japan
  Ujihara Kouji, Toyama Prefectural University, Department of Mechanical Systems Engineering / Japan Society for Precision Engineering, Kosugi, Toyama, Japan
# 108 Automatic Cutter Selection Based on Product Description and Machining Knowledge
  Matsuda Michiko, Kanagawa Institute of Technology, Department of Information and Computer Sciences, Kanagawa, Japan
  Kimura Fumihiko, University of Tokyo, Faculty of Engineering, Department of Precision Machinery Engineering, Graduate School of Engineering, Tokyo, Japan
# 79 Development of New Collaborative Design and Engineering Environment
  Ohtaka Akihiko, Nihon Unisys Ltd, Tokyo, Japan
  Sasao Shinobu, Nihon Unisys Ltd, Tokyo, Japan
# 123 Inheritance Semantics for Features
  Otto Harald E., University of Tokyo, Faculty of Engineering, Dept. of Precision Machinery Eng., CAD/CAM Research, Tokyo, Japan
  Kimura Fumihiko, University of Tokyo, Faculty of Engineering, Department of Precision Machinery Engineering, Graduate School of Engineering, Tokyo, Japan
  Mandorli Ferruccio, University of Ancona, Department of Mechanical Engineering, Ancona, Italy
# 77 Collaborative Development and Use of Ontologies for Design
  Takeda Hideaki, Nara Institute of Science and Technology, Graduate School of Information Science, Nara, Japan
  Nishida Toyoaki, Nara Institute of Science and Technology, Graduate School of Information Science, Nara, Japan
  Takaai Motoyui, Nara Institute of Science and Technology, Graduate School of Information Science, Nara, Japan
# 24 Feature Based Modeling of Machining Process Products
  Tanaka Fumiki, Hokkaido University, Manufacturing Information Engineering Lab., Division of Systems and Information Engineering, Graduate School of Engineering, Sapporo, Japan
  Kishinami Takeshi, Hokkaido University, Manufacturing Information Engineering Lab., Division of Systems and Information Engineering, Graduate School of Engineering, Sapporo, Japan
# 57 A Study on Object-Oriented Model Repository for Manufacturing System Modeling
  Tanimizu Yoshitaka, Osaka Prefecture University, Faculty of Engineering, Sakai, Osaka, Japan
  Iwata Kazuaki, Kochi National College of Technology, Kochi, Japan
  Sugimura Nobuhiro, Osaka Prefecture University, College of Engineering, Sakai, Osaka, Japan
# 51 Design Knowledge Collection by Modeling
  Yoshioka Masaharu, National Center for Science Information Systems, Research and Development Department, Bunkyo-ku (Tokyo), Japan
  Sekiya T., University of Tokyo, Research into Artifacts, Center for Engineering (RACE), Tokyo, Japan
  Tomiyama Testuo, University of Tokyo, Research into Artifacts, Center for Engineering (RACE), Tokyo, Japan

 

KOREA
# 109 Design and Assemble using Knowledge in Modular Jig/Fixture
  Tae-Soo Kim, Korea Institute of Science and Technology, CAD/CAM Research Center, Cheongryang (Seoul), Korea
  Jae-Ho Huh, Korea Institute of Science and Technology, CAD/CAM Research Center, Cheongryang (Seoul), Korea
# 126 A Development of Expert Design System for DRAW DIE in Automotive Industry
  Tae-Soo Kim, Korea Institute of Science and Technology, CAD/CAM Research Center, Cheongryang (Seoul), Korea
  Sang-Jun Lee, Korea Institute of Science and Technology, CAD/CAM Research Center, Cheongryang (Seoul), Korea
  Soon-Kyu Lim, Korea Institute of Science and Technology, CAD/CAM Research Center, Cheongryang (Seoul), Korea

 

MEXICO
# 13 The Application of the Manufacturing Model Over the INTERNET to Support the Integrated Product Development
  Al-Ashaab Ahmed H. S., Concurrent Engineering Research Group (CERG), ITESM Campus Monterrey, CSIM/DIA, E., Monterrey, Mexico
  Gadh R., University of Wisconsin-Madison, Department of Mechanical Engineering, Madison Wisconsin, USA
  Molina A., Concurrent Engineering Research Group (CERG), ITESM Campus Monterrey, CSIM/DIA, E., Monterrey, Mexico

 

MOROCCO
# 96 TAUTEM: Transfer and Advanced Use of Technologies of Manufacturing
  Chraibi Said, SYSCAD Productique, Casablanca, Morocco
  De Martino Monica, Istituto per la Matematica Applicata, CNR, Genova, Italy
  De Martino Teresa, Istituto per la Matematica Applicata, CNR, Genova, Italy
  Scarcelli Antonio, MATRA DATAVISION, Aix-en-Provence, France

 

NETHERLANDS
# 2 Cooperative Information Management for Distributed Production Nodes
  Afsarmanesh Hamideh, University of Amsterdam, WINS - Department of Computer Science, Amsterdam, Netherlands
  Benabdelkader Ammar, University of Amsterdam, WINS - Department of Computer Science, Amsterdam, Netherlands
  Hertzberger L.O., University of Amsterdam, WINS - Department of Computer Science, Amsterdam, Netherlands
# 37 Chimera: Multiple Faces of Web-Documents
  Dokter Duco A., Wisdom Research, Assen, Netherlands
  Allodi Alessandro, Nederlandse Aardolie Maatschappij, Assen, Netherlands
  Kuipers H.W.A.Edwin, University of Groningen, CCMC, Groningen, Netherlands
# 41 The Emergence of Open Electronic Commerce: Changes in the Management of the Value Chain
  Ganzaroli Andrea, Erasmus University Rotterdam, Erasmus University Research Institute for Decision Information System (EURIDIS), Department of Decision and Information Sciences, Rotterdam, Netherlands
  Pilotti Luciano, University of Padova, Department of Economics, Padova, Italy
# 43 Interorganizational Workflows
  van der Aalst Wil M.P., Eindhoven University of Technology, Department of Mathematics and Computing Science, Eindhoven, Netherlands
# 65 Know-How Management in Distributed Engineering Environments
  Vogels M.E.S., National Aerospace Laboratory NLR, Amsterdam, Netherlands
  Loeve Wout, National Aerospace Laboratory NLR, Amsterdam, Netherlands
# 40 A Model for Analysis and Redesign of Virtual Organizations
  Wognum P.M., University of Twente, Faculty of Technology and Management, Enschede, Netherlands
  Faber E.C.C., University of Twente, Faculty of Technology and Management, Enschede, Netherlands

 

NORWAY
# 18 A Model of Enterprise Integration and Collaboration Tools and Communication Infrastructure for Inter-Enterprise Collaboration
  Deng Ziqiong, Narvik Institute of Technology, Narvik, Norway
  Bang B., Narvik Institute of Technology, Narvik, Norway
  Laksa A., Narvik Institute of Technology, Narvik, Norway
  Nadarajah Sutharshan, Narvik Institute of Technology, Narvik, Norway

 

POLAND
# 127 Examples of Creating Computer Systems with Knowledge Bases for Computer Aided Manufacture (part II)
  Orlowski Cezary, Technical University of Gdansk, Faculty of Managment and Economics, Gdansk, Poland

 

PORTUGAL
# 11 A Distributed Order Promise and Planning System for the Virtual Enterprise
  Azevedo Américo Lopes, INESC and FEUP-University of Porto, Porto, Portugal
  Bastos Joao Augusto, INESC, Porto, Portugal
  Sousa Jorge Pinho, INESC and FEUP-University of Porto, Porto, Portugal
  Toscano César, INESC, Porto, Portugal
# 19 Capacity Modelling for Virtual Enterprises
  Bastos Joao Augusto, INESC, Porto, Portugal
  Sousa Jorge Pinho, INESC and FEUP-University of Porto, Porto, Portugal
# 110 Configuration and Coordination Issues in a Virtual Enterprise Environment
  Camarinha-Matos Luis M., New University of Lisbon, Faculty of Sciences and Technology, Monte Caparica (Lisboa), Portugal
  Lima C., New University of Lisbon, Faculty of Sciences and Technology, Monte Caparica, Portugal
# 12 TeleProd: an Internet Based Teleproductics System
  Firmeza Joao Paulo N., University of Aveiro, Department of Electronics & Telecommunications, Aveiro, Portugal
  Ramos Fernando M.S., University of Aveiro, Department of Electronics & Telecommunications, Aveiro, Portugal
# 69 From Telework Project Planning to Project Co-ordination, an Integrated Approach
  Silva José Augusto Pinho, FEUP-DEEC, Porto, Portugal
  Ferreira Joao José Pinto, FEUP-DEEC and INESC-UESP, Porto, Portugal
# 102 An Information System for Team Work Quality Support: across the Shop-Floor and beyond
  Soares Antonio Lucas, INESC-UESP and University of Porto, FEUP-DEEC, Porto, Portugal
  Gaida Waldemar, WZL-RWTH Aachen, Aachen, Germany
  Ritschel Wolf, University of Linkoeping, Department of Mechanical Engineering, Linkoeping, Sweden
  Schmidt Christian, FIR Aachen, Aachen, Germany
# 66 Applying Knowledge Sharing Technologies in the Enterprise Socio-Organizational Modelling: from Local Action to Global Understanding
  Soares Antonio Lucas, INESC-UESP and University of Porto, FEUP-DEEC, Porto, Portugal

 

ROMANIA
# 21 A Distributed Multicast Communication Toolkit within New Forms of Cooperative Work
  Musatescu C., University of Craiova, Computers Department, Craiova, Romania
  Burdescu D., University of Craiova, Computers Department, Craiova, Romania
  Hamburg Ileana, IAT Institut Arbeit und Technik, Gelsenkirchen, Germany

 

RUSSIA
# 61 IDEF-RAO: Methods for Industrial System Functional Structure Analysis
  Emelyanov Victor V., Moscow State Bauman University of Technology (PK-9 Dept.), Moscow, Russia
# 95 Multiagent Methodology for Computer Aided Design and Integrated Manufacturing
  Evgenev Georgy B., Bauman Moscow State Technical University, Moscow, Russia

 

SPAIN
# 82 Multimedia Communication Prototype for Severely Handicapped People
  Coltell-Simon Oscar, Jaume I University, Multimedia Systems Research Group, Departamento de Informatica, Castellon, Spain
  Carreres David, Centro de promocion social de paraliticos cerebrales adultos y minusvalidos fisicos gravemente afectados, Castellon, Spain
  Fores B., Jaume I University, Multimedia Systems Research Group, Departamento de Informatica, Castellon, Spain
  Llach Javier, Jaume I University, Multimedia Systems Research Group, Departamento de Informatica, Castellon, Spain
  Sanz Pedro J., Jaume I University, Multimedia Systems Research Group, Departamento de Informatica, Castellon, Spain
# 118 Resources Management in Virtual Enterprises
  Vivancos Calvet Joan, Universidad Politecnica de Cataluna, Departamento de Ingenieria Mecanica, Escuela Tecnica Superior de Ingenieros Industriales de Barcelona, Barcelona, Spain
  Gomà Ayats Joan Ramon, Centro CIM (UPC/ICT), Barcelona, Spain
  Marien Menno, Institut Català de Tecnologia (ICT), Barcelona, Spain

 

SWITZERLAND
# 124 Creating Corporate Environmental Information Systems
  Schlatter Andreas, Swiss Federal Institute of Technology Zurich (ETH), Institute of Industrial Engineering and Management (BWI), Zurich, Switzerland
  Zuest Rainer, Swiss Federal Institute of Technology Zurich (ETH), Institute of Industrial Engineering and Management (BWI), Zurich, Switzerland

 

UNITED KINGDOM
# 68 Rapid Protocol Development: a Framework for Fast Protocol Implementation
  Bertolissi Edy, University of Durham, School of Engineering, Durham, United Kingdom
  Daffara Carlo, Conecta Telematica Srl, Udine, Italy
  Preece Clive, University of Durham, School of Engineering, Durham, United Kingdom
# 9 Communication in Virtual Supply Chain Teams
  Carletta Jean, Universities of Edinburgh and Glasgow, Human Communication Research Centre, Edinburgh, United Kingdom
  Anderson Anne, Universities of Edinburgh and Glasgow, Human Communication Research Centre, Edinburgh, United Kingdom
  McEwan Rachel, Universities of Edinburgh and Glasgow, Human Communication Research Centre, Edinburgh, United Kingdom
# 101 DIME: Distributed Industrial Monitoring Environment
  Clearwaters W. Allan, The Object Forge Ltd, Malvern, Worcs., United Kingdom
# 15 The Plastics Industry: Multimedia & Market Competitiveness
  Foster Philip, University of Warwick, Warwick Regional Centre, Engineering Management Building, Coventry, United Kingdom
  D'Andrea Vincenzo, Università degli Studi di Trento, Dipartimento di Informatica e Studi Aziendali, Trento, Italy
  Pennington James, University of Warwick, Warwick Regional Centre, Engineering Management Building, Coventry, United Kingdom
  Rowberry Peter, University of Warwick, Warwick Regional Centre, Engineering Management Building, Coventry, United Kingdom
# 54 Issues and Solutions in Feature-Based Modelling: Re-Designing the Shape Kernel of CAD Systems
  Gomes Abel, Brunel University, Centre for Geometric Modelling and Design, Uxbridge, Middlesex, United Kingdom
  Middleditch Alan, Brunel University, Centre for Geometric Modelling and Design, Uxbridge, Middlesex, United Kingdom
  Reade Chris, Brunel University, Centre for Geometric Modelling and Design, Uxbridge, Middlesex, United Kingdom
# 14 Design Office Control Using Information Technology (DOCIT)
  Hodgins Denis J., European Technology for Business Ltd, Hertfordshire, United Kingdom
# 128 A Review of Engineering Design Support Systems and Models
  Monteiro Manuel, University of Paisley, Department of Computing and Information Systems, Paisley, United Kingdom
  Branki C., University of Paisley, Department of Computing and Information Systems, Paisley, United Kingdom
  Lees Brian, University of Paisley, Department of Computing and Information Systems, Paisley, United Kingdom
# 64 An Information Model Supported Inspection Environment within a Holonically Enhanced SME
  Newman Stephen T., Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom
  Bagshaw Richard W., Loughborough University, Department of Manufacturing Engineering, Loughborough Leicestershire, United Kingdom
# 107 Machine Loading Policies in Flexible Machining Cells
  Rahimifard Shahin, Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom
  Newman Stephen T., Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom
# 67 Resource Capability Modelling for Responsive Process Planning in Extended Manufacturing Facilities
  Ratchev Svetan M., University of Nottingham, Department of Manufacturing Engineering & Operations Management, Nottingham, United Kingdom
# 111 Towards Globalisation and the Virtual Enterprise
  Sharp J.A., University of Kent, Canterbury Business School, Canterbury Kent, United Kingdom
  Beach R., University of Bradford, Management Centre, Bradford, United Kingdom
  Muhlemann A.P., University of Bradford, Management Centre, Bradford, United Kingdom
  Paterson A., University of Kent, Canterbury Business School, Canterbury Kent, United Kingdom
  Price David H.R.,University of Bradford, Management Centre, Bradford, United Kingdom
# 20 Integration of Collaborative Approaches for Distributed Product Development
  Sreeram Ramani T., University of Bath, Department of Mechanical Engineering, Bath, United Kingdom
  Chawdhry P. K., University of Bath, Department of Mechanical Engineering, Bath, United Kingdom
# 53 Information Interactions in Data Model Driven Design for Manufacture
  Young Robert I.M., Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom
  Canciglieri-Jnr O., Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom
  Costa C.A., Loughborough University, Department of Manufacturing Engineering, Loughborough, Leicestershire, United Kingdom

 

USA
# 46 ENGEN Data Model: a Neutral Model to Capture Design Intent
  Anderson Bill, SCRA Advanced Technology Institute, Trident Research Center, North Charleston South Caroline, USA
  Ansaldi Silvia, Microelettra, Montecompatri (Roma), Italy
# 45 Towards STEP-Based Data Transfer in Layered Manufacturing
  Dutta Debasish, University of Michigan, Ann Arbor Michigan, USA
Kumar Vinod, University of Michigan, Ann Arbor Michigan, USA
Pratt Michael J., National Institute of Standards and Technology (NIST), Gaithersburg Maryland, USA
Sriram Ram D., National Institute for Standards and Technology (NIST), Gaithersburg Maryland, USA
# 62 A Manufacturing Planning and Execution Software Integration Architecture
  Feng Shaw C., National Institute of Standards and Technology, Manufacturing Systems Integration Division, Manufacturing Engineering Laboratory, Gaithersburg Maryland, USA
Zhang Y., National Institute of Standards and Technology, Manufacturing Systems Integration Division, Manufacturing Engineering Laboratory, Gaithersburg Maryland, USA
# 83 A Comparison of Different HCI Styles in a KBSE System
  Lazzeri Santos Gerardo, RECOM Technologies, NASA Ames Research Center, Moffet Field CA, USA
# 52 Domain Centered Design Support
  Mili Fatma, Oakland University, School of Engineering and Computer Science, Rochester Michigan, USA
Narayanan Krish, Oakland University, School of Engineering and Computer Science, Rochester Michigan, USA
# 30 Reactive Scheduling of Process Operations
  Mohindra Atul, The Foxboro Company, Foxboro MA, USA
Elkamel Ali, Kuwait University, Department of Chemical Engineering, Faculty of Engineering and Petroleum, Safat, Kuwait
# 42 Internet Can Open New Avenues to Your Business
  Montecucchi Pier Carlo, Intelligence - Net Office, Tallahassee FL, USA
# 49 Extension of the Standard ISO 10303 (STEP) for the Exchange of Parametric and Variational CAD Models
  Pratt Michael J., Rensselaer Polytechnic Institute, Center for Advanced Technology, Troy NY, USA
# 23 Engineering services on the web - the ACORN experience
  Terk Michael, Rice University, Department of Civil Engineering, Houston Texas, USA
Prinz Fritz B., Stanford University, Deparment of Mechanical Engineering, Stanford CA, USA
Konda S., Carnegie Mellon University, Software Engineering Institute and Institute for Complex Engineering Systems, Pittsburgh PA, USA
Subrahmanian E., Carnegie Mellon University, Institute for Complex Engineering Systems, Pittsburgh PA, USA

For further information: prolamat@lii.unitn.it